Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before taking into operation for the first time, the installation has to be approved by an expert!
5.2 Mounting steps
Step 1: Unpack the display panel and unfold it. Insert the supplied support bar into the corresponding
loops at the top of the protective cover. Several support bars can be connected with screws.
Step 2: Loop each belt with its hook pointing upwards around the support bar and a truss or another
suitable suspension point holding the 4-fold point load of all display panels. Fasten the hooks.
Additionally, use suitable secondary safety elements (e.g. steel ropes).
Step 3: Use the press buttons and the hook-and-loop connectors to connect several display panels
horizontally and vertically to built-up a large area. Additionally, fasten each hook on the belt of
the lower panel to the belt of the upper panel.
Step 4: The length of the belts and thus the distance between the display panels can be adjusted by
sliding the buckles.
DANGER TO LIFE!
5-1 Mounting steps
42/62
00049757.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
