Operating Determinations - EuroLite LSD-100 Bedienungsanleitung

3. OPERATING DETERMINATIONS

The flexible display panels of the LSD series, quipped with extremely bright tri-color RGB LEDs, type SMD
5050, were specially designed for projection of videos and graphics synchronous to the computer. The
panels are made of bendable and foldable PVC material and can be easily suspended from truss systems.
The modular design allows the horizontal and vertical built-up of video screens, indoor and outdoor. Control
is via special PC software and network components (optionally available).
This product is only allowed to be operated with the voltage given on the type plate.
This device is splash-proof (IP 44) and therefore qualified for indoor and outdoor use. For outdoor use, the
installer must always make sure to connect a rubber cable HO5RR-F. All valid instructions concerning the
installation of cables outdoors or in the ground must be adhered!
The ambient temperature must always be between -10° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The maximum relative humidity is 100 % with an ambient temperature of
25° C. This device must only be operated in an altitude between -20 and 2000 m over NN.
Do not shake the device. Avoid brute force when installing or operating the device.
Before installing the system, make sure that the installation area can hold a minimum point load of 4 times
the system's load (e.g. weight 20 kg - point load 80 kg).
For overhead use (mounting height >100 cm), always secure the installation with an appropriate secondary
safety element (e.g. steel rope).
Make sure the area below the installation place is cordoned off when rigging, derigging or servicing the
device.
Do not connect display panels to the mains while they are folded.
The F-symbol means: this device can be installed on normal inflammable surfaces.
- - -m
The symbol determines the minimum distance from lighted objects. The minimum distance
between light output and the illuminated surface must be more than the given value.
The maximum ambient temperature T must never be exceeded.
a
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, etc.
35/62 00049757.DOC, Version 1.1