Control - EuroLite GD-25 Bedienungsanleitung

6

CONTROL

Image processing, configuration and the setting of the control functions for the displays are done with the PC
software LED VISION together with a computer. The computer requires a Windows operating system and a
separate network card for the operation with the displays. The data is transmitted from the computer to the
displays via a patch cable (min. CAT5). To built-up a large video wall up to 320 processors can be connected
in series using patch cables. More network cards can be used to increase the number of processors. The
system is recommended for recorded video material, Madrix applications and visualizations.
GD-8 Processor
1
1 Signal inputs 1 – 8 for connecting the displays.
2 24 V power outputs 9 – 16 for connecting the displays.
3 230 V power input and output
4 RJ-45 interface
Link A: Connection to a PC via patch cable.
Link B: Connection to another GD-8 processor.
5 Status LEDs.
POWER: Lights up when power supply is established.
SIGNAL: Lights up when a data connection is established.
6 Button Test for function tests.
www.eurolite.de
2
3
19
5 6
4