Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, etc.
OVERVIEW
INSTALLATION
Mounting
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for 1
hour without any harming deformation.
Before rigging make sure that the installation area can hold a minimum point load of 10 times the device's
weight.
Do only use appropriate screws and make sure that the screws are properly connected with the ground.
Operation
Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet.
With the POWER switch on the cable of the power-unit, you can switch the device on and off.
1. Mounting eyelets
2. DC IN-socket
10/19
00026526.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
