Bartscher 600 Serie Bedienungsanleitung Seite 24

SUBSTITUTING COMPONENTS
ATTENTION! Before carrying out any substitutions, make sure that the appliance is
disconnected from the electric mains.
Power regulator
In order to replace the power regulator, remove the knob and the control panel. The power regulator
is placed on the back of the control panel, where it is fixed thanks to 2 screws. Remove the
component and replace it.
Heating elements (fig. 6 – page 3)
In order to replace the radiating heating element, unscrew the screws fixing the heating element to
the radiating element head. Take out the heating element; disconnect the electric cables; remove the
component and replace it. Then, connect the electric cables and handle the heating element with
care, because its external coating is quite fragile.
Information for electrical and electronic devices used in EU countries
According to EU directives, devices marked with the following symbol , may not be disposed
of together with normal household waste.
To dispose of your used device, please use the locally available differentiated collection system or
consult your retailer when you buy an equivalent product.
By actively using the provided collection systems, you are contributing to the reuse, recycling and
enhancement of electrical or electronic devices and protecting the environment and health.
Abusive product disposal is punishable by law in accordance with current legislation.
WHEN SUBSTITUTING, ONLY ORIGINAL SPARE PARTS SUPPLIED BY THE
MANUFACTURER MUST BE USED. THE OPERATION MUST BE CARRIED OUT BY
AUTHORIZED PERSONNEL.
THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY
THE FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL.
Pag. 23/31