Bartscher 600 Serie Bedienungsanleitung Seite 19

Model
K6ESP05TT Electric chip scuttle ½ unit top
WARNINGS
General
 Read the instructions carefully before installation, use and maintenance of the appliance.
 The installation has to be carried out by qualified personnel following the manufacturer's
instructions in the specific manual.
 The appliance is suitable only for preparing and cooking food in commercial kitchens such as
those used in restaurants, hospitals, company canteens, cooking centres, butcher's shops and
food production firms. Any other type of use is not in accordance with the intended purpose and
could place people and/or objects at risk.
 The appliance has to be used by trained personnel only and for the intended use only, that is to
say to keep fried and/or already heated food warm.
 Due to the nature of the appliance, the temperatures required for cooking may cause various
areas of the panelling, as well as kitchenware, to become hot. This is not a construction defect,
but a physical phenomenon caused by the chemical and physical properties of the materials used
for the construction of the appliances.
 In the event of breakdown or malfunctioning, switch off the appliance and call the after sales
assistance from an authorized centre only.
 Only use genuine spare parts; otherwise no liability is assumed by the manufacturer.
 The appliance must not be washed with high pressure water sprays; the vents or inlets/outlets for
air, fumes and heat must not be obstructed.
 Before connecting the appliance make sure that the plate specifications correspond to the electrical
supply.
 ATTENTION! Never touch the infrared radiator while the appliance is working or immediately
after switching it off. RISK TO GET BURNT.
 When not in use, make sure the appliance is disconnected from the electric mains.
ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorized changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet.
For the installer
 The functioning of the appliance has to be explained and shown to the user. After ensuring that
everything is clear, the instruction booklet has to be handed over to the user.
(Table 1) TECHNICAL FEATURES
Description
Pag. 18/31
Tension
Dimensions Elect. Power.
LxDxH [mm] (E) [Kw]
300x600x535 0.8
Freq. Cable Type
(F) (G) H07 RN-F
[V] [Hz] [mm2]
230 1N 50/60 3x1