Proceed as follows to remove the cutting insert 3 4 5:
♦
Turn the feed tube 2 clockwise towards the
♦
You can now carefully remove the cutting insert 3 4 5 from the opening
of the motor unit 6 . Do not reach into the knife, it is very sharp!
Preparing the food
Choose the right food before processing and prepare it appropriately:
■
Wash and dry the fruit or vegetables . Remove all leaves, flowers and stalks .
The flatter the surface of the food, the more even the result .
■
Most types of vegetables and fruit with firm flesh are suitable . The firmer the
food, the better the result .
■
Foods with a very soft structure, such as avocados or bananas, are not
suitable for spiral cutting .
■
Food with thick skins, such as kohlrabi or pumpkins, must be peeled before
processing .
■
Before processing, cut the food so that it fits through the feed tube 2 . The
optimum diameter is 3–6 cm . This ensures that the food is small enough for
the feed tube 2 and big enough to be fixed correctly on the pusher 1 .
SSSE 300 A1
symbol and remove it .
GB │ IE
│
25
■