Operation - Silvercrest IAN 309650 Bedienungsanleitung

Operation

WARNING – RISK OF INJURY!
► Switch off the appliance and unplug the mains plug from the mains socket
before inserting/replacing accessories or removing the collector 7 .
► Never press foods into the feed tube 2 with your bare hands . Always use
the pusher 1 .
CAUTION – PROPERTY DAMAGE!
► The appliance is designed for a maximum operating time of 100 seconds
(CO time) without interruption . Afterwards, the appliance must be switched
off until the motor has cooled down .
♦
Skewer the prepared food firmly on the underside of the pusher 1 and
position it as vertically as possible in the feed tube 2 .
♦
Press the food with the pusher 1 constantly and gently downwards and
switch on the appliance by turning the rotary switch 9 to position 1 .
The cutting insert 3 4 5 starts to rotate and process the food .
NOTE
► The motor of the unit will not start until the feed tube 2 has been correctly
installed . Therefore, switch off the appliance and check the position of the
feed tube 2 if the motor does not start immediately .
► Exert light pressure only to avoid crushing the food, especially if you are
processing foods with a softer structure .
♦
Switch off the appliance by setting the rotary switch 9 to position 0 .
♦
Disconnect the mains plug from the socket if you want to remove the
collector 7, change the cutting insert 3 4 5 or clean the appliance .
■ 26 │ GB │ IE
SSSE 300 A1