Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Product description
The remote operating and display panel can be used to perform the same operating procedures as
the control panel, enabling variable operation of a networked system.
A touch screen (A) enables flexible, country-specific adaptation of the user interface via virtual but-
tons and variable display windows. All system messages are displayed on the central LCD display.
22 fixed buttons (B) for standard entries are positioned around the touch screen. 11 LEDs (C) indi-
cate the system's operating status. The integrated key switch (D) with 3 switch settings is freely
programmable, e.g. for switching between day/night mode and connecting/disconnecting for local
alarm signaling.
The control unit has 2 CAN interfaces (CAN1/CAN2) to enable system networking using bus or loop
topology. 2 signal inputs (IN1 / IN2) and 3 additional connections (Ethernet, USB, RS232) are also
available.
On the rear are 3 rotary switches for addressing, 6 DIP switches for configuring and a RESET button
for resetting the system (see page 34).
The easy-to-install housing was designed for tilted installation and for flush and surface wall moun-
ting.
2 x DC1 / 2 x DC2
IN1 / GND / IN2
2 x CAN1 / 2 x CAN2
Technical Specifications
LCD display /
touch screen
Operating and display elements
Connections
Perm. length of CAN cable for sy-
stem networking
Input voltage
Max. line resistance of power sup-
ply
Maximum current consumption
Permissible operating temperature -5 °C. . . 50 °C
Permissible storage temperature
Housing material and color
Dimensions (H x W x D)
Weight
C
D
LCD display with 320 x 240 pixels
Touch screen with 127.5 mm x 170 mm (5.0 in. x 6.7 in.)
active surface
22 buttons, 1 key switch, 11 LEDs, 1 RESET button
DC1 (power supply), DC2 (redundant power supply, CAN1,
CAN2, Ethernet 100BaseTX, USB
, RS232
length)
(IN1/IN2)
L
= 1000 m, depending on topology and cable type
max
configuration, see configuration, starting page 30
11 V DC . . . 30 V DC from FPA-5000 or FPP-5000
18 Ohm
- standby operation: 130 mA at 24 V DC
- during an alarm: 225 mA at 24 V DC
-20 °C. . . 70 °C
ABS plastic, (UL94 V-0), light gray, similar to RAL 7035
280 mm x 340 mm x 87.2 mm
(11.0 in. x 13.4 in. x 3.4 in.)
approx. 3000 g (6.6 lb)
8 / 40
A
(max. 3 m (10 ft) cable
(max. 3 m (10 ft) cable length),
GB
B
RS232
USB Host
USB Device
Ethernet
(RJ45)
2 signal inputs
BDL-F01U029078 / A3.ml
ST - FIR / PRM1 / deh
Werbung
