Extremis WALRUS Bedienungsanleitung Seite 5

5. Now attach the tabletop to the frame, using 4 M8x12 bolts and an M8 flat washer on each bolt.
PLEASE NOTE
: make sure the holes match up, and then tighten all the bolts in the tabletop and backrest.
6. Place the seat cushion on the frame and fix it in place by attaching the Velcro straps to the two rods in the middle.
OPTIONAL
1. Open the cover of the backrest. Attach the blanket to
the backrest using the glass fibre rod (L = 985 mm)
included with the blanket.
2. Drape the blanket over the sofa and add the cushion.
english 5