auna multimedia 10027418 Handbuch Seite 16

Playing a Cimpact Disc (CD)
NOTE: Never touch the laser lens inside of the CD compartment. Clean the laser lens with a CD cleaner disc if it
becomes dirty.
• Press the Power ON/OFF Button to turn on the unit.
• Press the Function Button to CD function.
• Press the OPEN/CLOSE BUTTON to open the CD door and insert a CD into the tray with printed label side facing
up.
• Press the OPEN/CLOSE BUTTON to close the CD DOOR and, the disc will rotate for a few seconds and then
stop.
• Press the PLAY/PAUSE BUTTON to start play
• Press the PLAY/PAUSE BUTTON again to PAUSE play.
• To stop the album temporarily, press PAUSE button, to resume, press again.
• Press the STOP BUTTON to STOP play.
Random Play
• In CD stop mode, Press the
BUTTON, this will enable random tracks play.
Reverse/Forward
• The or Buttons can be used to jump to a different track number or to scan disc tracks at high speed.
• Press the BUTTON once to hear the beginning of the current track. Press it two or more times to hear pre-
vious tracks on the disc.
• Press the BUTTON to hear the next track on the disc.
• Press and hold the
When the desired track section is found, release the button and normal play will resume.
• Press and hold the
the desired track section is found, release the selected button and normal play will resume.
Repeat Function
• The CD REPEAT Button may be used to repeat a single track or repeat all tracks on a compact disc.
• Press the REPEAT
same track will be repeated over and over.
• Press the REPEAT BUTTON a second time to repeat all tracks. The "REPEAT ALL" sign will show on the LCD
display, but will not flash this time.
• To cancel REPEAT PLAY, Press the REPEAT
Program Function
• The Program feature can be used to program up to 20 tracks to play in a selected order.
• While in the stop mode only (CD is not playing), press the CD PROGRAM "PROG" Button, LCD Display will show
the wording "PROG 01" and "PROG 01" starts to flash.
• Press the or Button to allocate the desired track.
• Press the CD PROGRAM BUTTON to select and store the track into memory.
• Repeat step 2 to 3 to select up to 20 tracks.
• To play the selected tracks (in the program mode); press the CD PLAY/PAUSE BUTTON. The track number and
the "PROG" appear on LCD Display.
• Press the Button to hear the previous or press the
• Note: After all of the programmed tracks have played, the CD player will return to the stop mode.
• To clear the programmed tracks from memory, press
BUTTON three times until RAND appear on LCD Display. Press
Button, the current track will be scanned and move backwards to the previous track(s);
BUTTON, the current track will be scanned and move forward to the next track(s); When
BUTTON once during playback, the "REP" sign will show on LCD Display and flash. The
BUTTON repeatedly until the "REP" sign disappeared.
Button, buttons to hear next program track.
STOP two times.
or
16