Electrical Connection - Faber Fabula BK 90 RB Bedienungsanleitung

Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to
the chimney using either a flexible or rigid pipe ø 150
or 120 mm, the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert
the reducer flange 9 on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps
(not supplied).
• Remove possible charcoal filters.
Connecting the Electric Unit and the Remote Motor
Connect the Remote Suction Kit wiring to the free connector provided on the output from the
Electric Unit.
Connect the Remote Motor Kit power cable plug to the Mains Power Supply, inserting a
bipolar switch with a contact aperture of at least 3 mm.
EN

Electrical connection

ø 120
ø 150
9
3 30