Sony BKM-244CC Bedienungsanleitung Seite 6

WARNING
For the customers in the U.S.A.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in
which case the user will be required to correct
the interference at his own expense.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
All interface cables used to connect peripherals
must be shielded in order to comply with the
limits for a digital device pursuant to Subpart B
of Part 15 of FCC Rules.
For the customers in Europe
This product with the CE marking complies
with the EMC Directive issued by the
Commission of the European Community.
Compliance with this directive implies
conformity to the following European
standards:
• EN55103-1 : Electromagnetic
Interference(Emission)
• EN55103-2 : Electromagnetic
Susceptibility(Immunity)
This product is intended for use in the
following Electromagnetic Environments: E1
(residential), E2 (commercial and light
industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
For the customers in Europe
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
Japan.
The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
6
Overview / Function
Overview
The BKM-244CC HD/SD-SDI Closed Caption
Adaptor is a video signal input adaptor for
Sony professional monitors. When installed in
an input option slot on the main unit, it
provides video input and output connectors for
the main unit and a decoder for HD/SD serial
digital component signals.
Function
Decoder for serial digital component
signals
The BKM-244CC is equipped with a built-in
decoder for serial digital component signals.
Serial digital input and output signal
connector
The BKM-244CC is equipped with two input
and one monitor output connectors for serial
digital signals.
Closed caption decode display
The BKM-244CC can decode closed caption
signals that are superimposed on serial digital
signals, and display those closed caption
signals over the video signals.