Operation - OHAUS SD Serie Bedienungsanleitung

EN-6 SD SERIES BENCH SCALE
Low Battery Indication
•
dsplay
approxmately 12 hours of operaton reman. When the battery s fully
depleted, the scale wll momentarly dsplay "Lo bAt" and shut off.

Operation

Power Up Test
•
s turned on, all dsplay segments wll appear for a short tme, followed by
the software verson. The dsplay wll then reset to zero.
Zero Function
•
returns to zero. When addng addtonal mass, the ON/ZERO Off button
may be used repeatedly untl the full capacty of the scale s reached.
When a contaner s used, the ON/ZERO Off button may be used to
smulate a Tare functon. Addtonal mass may then be added as a NET
weght. When removng both the sample and contaner from the scale, a
negatve value may be dsplayed. Zero the scale agan before subsequent
usage.
NOTE: The ON/ZERO Off button wll perform a true zero settng functon when
dsplayed values are wthn +2% of full capacty. Above 2%, the range s
lmted to full capacty by subtracton.
Negative Values
•
zeroed value wll be dsplayed as a negatve number. To return to normal
operaton, the negatve value s cleared from the dsplay by pressng the
ON/ZERO Off button .
Overload
•
dsplayed. Remove the load and the scale wll return to normal operaton.
: The battery symbol on the left sde of the
ndcates a low battery condton. When frst dsplayed ,
: When the ON/ZERO Off button s pressed, the scale
: By pressng the ON/ZERO Off button, the scale dsplay
: When a load s removed from the scale, any prevously
: If the appled load exceeds the capacty of the scale, an "E" s