Vitek VT-2502 CR Betriebsanweisung Seite 4

ENGLISH
unwinding the power cord at full length.
•- The power cord should not:
- - touch hot objects,
- - run through sharp edges,
- - be used as a carrying handle.
•- Periodically check the integrity of the power
cord.
•- Never use the device if the power cord or the
plug is damaged; if the device malfunctions
or after it fell. Apply to the authorized service
center for all repair issues.
•- Let the device cool down completely before
taking the device away for keeping and never
wind the power cord over the device.
THE DEVICE IS INTENDED FOR HOUSEHOLD
USAGE ONLY.
Switching on the hairdryer
Before switching on make sure that, the voltage
of the electric network corresponds to the oper-
ating voltage of the device.
- - Unwind the power cord completely.
- - Insert the network cord plug into the socket.
- - Use the air supply speed switch (5) to set the
required speed:
"0" – off;
– low speed;
– high speed.
- - Using the switch (4) set the necessary air
temperature:
— low temperature;
— medium temperature;
— maximum temperature.
Hair care
To get the best results (before drying or styling)
wash your hair with shampoo, dry it with a towel
and comb your hair.
Quick drying
Set the switch (4) into the position of maximum
temperature (position
air speed using the switch (5) and dry your hair.
Shake off from your hair excessive moisture with
your hand or a comb and constantly move the
hairdryer over your hair.
Straightening
Set the switch (4) into the position of maximum
VT-2502 IM.indd 4
), choose the necessary
temperature (position
air speed using the switch (5), choose the neces-
sary air speed and begin drying your hair. When the
hair is almost dry, fix the concentrator attachment
(1), using the switch (4) lower the air temperature,
using the switch (5) lower the air speed.
Divide hair into strands and layers, begin straight-
ening from the lowest layers. Using a round or flat
brush comb hair downwards and simultaneously
direct hot air into hair going out of the concen-
trator attachment. Acting in such a way straight-
en each strand from roots to tips. When you
have straightened the lower layer strands, begin
straightening the medium layer strands and finish
with straightening the upper layer strands.
Natural wavy hair structure
Set the switch (4) into the position of low tem-
perature (position ), choose the low air speed,
set the switch (5) into position
hair strands between fingers, turn the hair into
the side of its natural waiving and dry it, directing
the air flow between the fingers. Having achieved
the desired effect, press the button of "cooling"
air supply "  " (3) and fix each strand.
Styling
Set the switches (4, 5) to the position of low tem-
perature/speed, fix the concentrator attach-
ment (1) on the device for directed air flow.
Divide hair into strands and create a style you
want using a round brush for styling. While cre-
ating a style direct the air flow at the hair in the
desired direction.
If necessary, direct the air flow at each strand
during 2–5 seconds to fix your hair. Time that
is necessary for styling should be selected
individually and depends upon the type of your
hair.
"Cool" air supply
This model has a "cool" air supply function for
fixing up your hair. Press and hold the button of
"cool" air supply "  " (3) — this will allow to fix the
created hairstyle.
Diffuser
Air scattered by the diffuser contributes to soft
drying and makes your hair voluminous. Special
"fingers" make your hairstyle voluminous, to
4
), choose the necessary
, firmly squeeze
28.04.2012 16:14:58