Vitek VT-2502 CR Betriebsanweisung Seite 35

Note: While first usage of the hair-straight-
ener foreign smell from the heating element
can appear, it is allowable.
−- Buttons (3) «+» and «-» set the necessary
temperature of the operating plates in the
temperature interval from 130°С to 230°С.
The following settings are recommended:
Hair type and
application
Damaged, color treated
and bleached hair
Normal hair
For professional hairstyle
Note:
• Temperature indicator flashing (2) means
that heating of operating plates (1) is go-
ing on, constant lighting of indicator (2)
means that plates (1) are heated to the
set temperature and you can begin hair
straightening.
• When setting the temperature remember
that heating of the operating plates is go-
ing very quickly and their cooling takes a
longer time.
−- Divide the hair into locks not wider than 4-5 cm.
−- Wait until the operating plates (1) heat up to
the set temperature.
−- Put a lock between the plates (1) and press
them together. During hair straightening press
the operating plates only in the handle zone,
do not touch the hair-straightener housing, the
housing edges and the operating plates (1).
−- Hold for several seconds and move the de-
vice along the whole length of a lock, slightly
pressing the plates.
−- Repeat the procedure until you finish straight-
ening all your hair.
−- When you have finished hair straightening
switch off the device by pressing and hold-
ing button (4) on/off, pull the plug out of the
socket and let the device cool down com-
pletely.
Note: The device will automatically switch
off in about 30 minutes after latest pressing
buttons (3) «+» and «-».
VT-2502 IM.indd 35
Temperature
From 130 to +170°C
From 170 to +190°C
From 190 to +230°C
ENGLISH
Clean and care
•- Before cleaning unplug the device and let it
cool down completely.
•- Do not immerse the housing, the power cord
and the power plug of the device into water or
other liquids.
•- Wipe the outer surface of the housing and the
operating plates with a soft damp cloth.
•- Do not use abrasives and solvents to clean
the device.
Storage
•- Let the device cool down completely and
make sure that the housing is clean and dry
before taking it away.
•- Never wind the cord around the device. It can
cause damaging of the device.
•- To make using the device comfortable there
is a hanger loop (5), you can keep the hair-
straightener being hanged up by this loop
provided that no water gets inside.
•- Keep the device in a dry cool place out of
reach of children.
Delivery set
1. Hair-straightener – 1 pcs.
2. Instruction manual – 1 pcs.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V, ~ 50/60 Hz
Power consumption: 40 W.
The manufacture preserves the right to change
the specifications of the device without a pre-
liminary notification.
Service life of the hair-straightener is not
less than 5 years.
Guarantee
Details regarding guarantee conditions can
be obtained from the dealer from whom the
appliance was purchased. The bill of sale or
receipt must be produced when making any
claim under the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Low Voltage
Regulation (73/23 EEC)
35
28.04.2012 16:15:02