Electromagnetic Compatibility Tables - KaWe LED 2000 Gebrauchsanweisung

10. ELECTROMAGNETIC COMPATIBILITY TABLES

This KaWe examination lamp is subject to special safety measures with regard to EMC requirements and must be installed in accordance with the
enclosed EMC instructions. The functionality of this KaWe examination light can be influenced by portable and mobile HF communication devices.
The use of other accessories will result in increased emissions or decreased immunity of the unit.
For the intended operation of the KaWe examination light, it is necessary that the light not be placed directly next to
or stacked together with other equipment. If the lamp must be used directly next to or while stacked with other equipment,
the KaWe examination light is to be closely monitored.
Table 10.1
Guidelines and Manufacturer Declaration – Electromagnetic Emissions
The KaWe examination lamp is designed to be used in the types of environments listed below.
The customer or user of the examination lamp is responsible for ensuring that this device is used in such an environment.
Emissions Measurement
Harmonic oscillations according
to IEC 61000-3-2
Voltage fluctuations / flicker emissions
according to IEC 61000-3-3
Type-CISPR 15-1
high frequency emissions
18
Guidelines and Manufacturer Declaration – Electromagnetic Emissions
Conformity
Class A
Complies
Complies
Electromagnetic environment – guidelines
The KaWe examination lamp is designed for use in all facilities includ-
ing living spaces that are directly connected to a public low-voltage
power supply network that also supplies power to buildings used for
domestic purposes.
The KaWe examination lamp is not designed to be connected to any
other type of device.