Stand Assembly; User's Manual; Base; Stand Post - KaWe LED 2000 Gebrauchsanweisung

3.1 Stand assembly

• Remove the screw and washer.
• Insert the stand post into the wheel brace
Make sure that the pin Z on the botton of the power supply
housing 14 is completely inserted into the receptacle A, so that the
locking screw S engages in the provided groove N.

4. USER'S MANUAL

4.1 Base

• Engage the brake on the lockable castors
• Secure the brakes on the locking castors.
• To move the light, release the brakes on the castors
14

4.2 Stand post

• Adjust to desired height

4.3 Operating the light

4.3.1 ON/OFF switch

The KaWe examination light is turned OFF and ON by pressing on the
switch 16 on the light body.

4.3.2 Positioning

To adjust the position of the light arm, use the clamping lever 17 on
the transformer houseing.
Adjust the position of the light body using the hand grip 18. The flexi-
ble joint G holds the light body in the desired position.