CAMPAGNOLO SPEED 11 Bedienungsanleitung Seite 35

5.4 - ADJUSTING LEVER POSITION
Campagnolo Bar End controls allow
the lever to be adjusted into the most
aerodynamic and comfortable position
possible. After the lever is operated, it
returns automatically into the initial posi-
tion set by you.
Modify the lever position as follows:
• loosen the inner inclination adjustment
screw by 3 mm, without removing the
screw itself (Fig. 7)
• move the lever into the desired position
(Fig. 8).
When setting the left hand lever into a
very high or very low position, check that
when pushed through multiple clicks to
reach its end of travel, the lever itself
does not come into contact with the fixed
part of the control set.
ENGLISH
7
8
35