On/Off Timer - Hitachi RAK-60PPA Bedienungsanleitung

ONCE TIMER (ON/OFF TIMER) OPERATION
To cancel Reservation
■
Point the signal window of the remote controller towards the indoor unit and press
●
and "ON or OFF set time" goes out with a beep and the (TIMER) lamp on the indoor unit turns off.
NOTE
User can set only one of the OFF-timer, ON-timer or ON/OFF-timer.
●
If WEEKLY TIMER already set, by setting the ONCE TIMER, ONCE TIMER operation is prioriti zed. When
●
ONCE TIMER operation is complete, WEEKLY TIMER operation will be activated.
OFF TIMER
The device can be set to turn off at a preset time.
1. Press (OFF-TIMER) button.
2. Set the "turn-off time" with
1
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" lights up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the
indoor unit lights up.
ON TIMER
The device will turn on at a designated time.
1. Press (ON-TIMER) button.
2. Set the "turn-on time" with
3. After setting, direct the remote controller towards the indoor and press
(SEND) button.
and "set time" light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.

ON/OFF TIMER

The device will turn on (off) and off (on) at the designated time.
●
The switching occurs first at the preset time that comes earlier.
●
The arrow mark appears on the display to indicate the sequence of switching
●
operations.
1. Press (OFF-TIMER) button so that
display.
2. Set the "turn-off" time with
controller towards the indoor and press
3. Press (ON-TIMER) button so that
The and
4. Set the "turn-on" time with
5. After setting, direct the remote controller towards the indoor and press
(SEND) button
and set "turn-on" time light up instead of blinking.
A beep sound emitted from indoor unit and the (TIMER) lamp on the indoor
unit lights up.
■
The timer may be used in three ways: OFF-timer, ON-timer and ON/OFF (OFF/ON)-
timer. Set the current time first because it serves as a reference.
– 21 –
– 21 –
and
(TIME) button.
and
(TIME) button.
and
(TIME) button. After setting, direct the remote
(SEND) button.
and set "turn-off" time light up.
blink.
(TIME) button.
blink on the display.
blink on the display.
blink on the
(CANCEL) button.