Workplace; Electrical Safety - Matrix AG 2200-230 Evolution Gebrauchsanleitung

Table of contents
1. Description of symbols
2. Machine components
3. Proper usage
4. Safety instructions and warnings
5. Safety instructions
6. Special safety instructions
7. Installing protective cover and grinding wheels
8. Working with the Angle Grinder
9. Maintenance and care
10. Technical data
11. Repairs
12. Environmental protection
1. Safety instructions and warnings
The equipment complies with the safety regulati-
ons required for electrical equipment.
Read through the instructions for use before star-
ting up the equipment.
Improper use can lead to personal injury and pro-
perty damage. Persons, who are not familiar with
the instructions, may not operate the equipment.
Keep the instructions for use in safe custody.
Children and youths are not permitted to operate
the equipment.
2. Description of symbols
Pay attention to all the signs and symbols shown
in these instructions and on your tool. Make a
note of these signs and symbols. If you interpret
the signs and symbols correctly, your work with
the machine will be safer and better.
Attention!
Please read operating instructions.
Wear safety goggles.
Wear ear protection.
Wear breathing apparatus.
Wear good quality, strong gloves.
3. Machine components (B1)
1. Protective cover
2. On/Off switch
3. Auxiliary handle
4. Grinding wheel
5. Spindle locking button
6. Clamping nut wrench
4. Proper usage
The device is designed for cutting, grinding,
roughing, and polishing metals, rocks, and cera-
mic, allowing for the right accessory.
The manufacture assumes no liability whatsoe-
ver for improper use or if the machine has been
tampered with.
Give equal attention to the safety instructions,
assembly and operating instructions as well as
prevailing accident preventions regulations.
5. General safety instructions

WORKPLACE

Keep your workplace clean and well lit at all
times to prevent accidents.
Do not use electric machines in the vicinity of
inflammable liquids or gases or in wet or damp
environments. If you fail to follow this instruc-
tion, there is a risk of fire or explosion.
Do not leave the machine running without
supervision.
Do not use the machine if you are tired or lack
concentration or your reactions are impaired
due to the consumption of alcohol or medica-
tion.
Inattentiveness can cause serious injuries.

ELECTRICAL SAFETY

The mains voltage must be identical with the
details on the machine's rating plate.
Avoid physical contact with earthed parts, for
example pipes, radiators, stoves, refrigerators,
etc. to prevent receiving an electric shock.
Never carry the machine by its cable. Only pull
GB
7