Installation; A) Attaching Floor Stand - Sygonix 2144009 Bedienungsanleitung

10. Installation

Disconnect the heater from the power supply before attaching the floor stand or while mounting.
heater must be operated in a horizontal position, otherwise it might not work properly. Please observe
during installation.
The floor stand may leave scratches on sensitive surfaces.
No objects such as a shelf may be located within 1 m of the heater.

a) Attaching Floor Stand

• Turn the heater upside down and gently place it onto a flat level surface.
• Fasten each foot using a cross-head screwdriver. Use the included screws as shown.
31