C) Night Timer - Sygonix 2144009 Bedienungsanleitung

c) Night Timer

Notes About the Night Timer
• Once set, the night timer will run every night of the week (Monday to Sunday)
• The timer should be set at the time you want it to run each night. For example, if you want the timer to start at 7 pm,
you should set the timer at 7 pm.
• The timer can be set to run from 1-12 hours.
• See section "h) Skip Timer" and "i) Clear a Timer" for information about how to delay or deactivate the night timer.
• If the day and night timer overlap, the next timer in the sequence will run.
• If a timer has been set but is not active, the heater will go into "sleep mode" and stop heating.
Setting the Night Timer
• The night timer LED
• It will be steady red to show a timer has been programmed but is not active.
36
(11) will glow green when timer is set and active.
Press , the display (10) will show
• Use the arrow buttons
desired temperature.
• Press to save.
• Use the arrow buttons
desired number of hours.
• Press to save.
.
/ to select the
/ to select the