Wall Mounting - Sygonix 2144009 Bedienungsanleitung

b) Wall Mounting
Make sure no cables or pipes are damaged when drilling mounting holes or securing the screws. If in doubt
about how or where to mount the heater, contact a qualified professional.
Consider the power cable length when chosing a location for mounting. Do not use an extension cord.
The supplied screws and wall plugs are suitable for solid walls.Please use suitable screws and wall plugs
for other types of walls. If in doubt, contact a qualified professional
The hook mounts are pre-assembled on the back of the heater. Use an 8 mm diameter drill bit to drill the
holes for the plastic dowels.
• Use the included drilling template paper to mark the position for the top two holes.
Use a leveler to make sure it is perfectly horizontal.
• Drill two holes (ø8 mm) and insert the dowels.
• Insert the screws, leaving the minimum amount of space protruding for the mounts to hook onto. They should hook
behind the head of the screw, not over the top.
v
32
30 cm
30 cm
The heater should be mounted so there is at least 30 cm
clearance from the ground, adjacent walls, and ceiling.
•