PizzaGroup ENTRY MAX 4 Gebrauchsanweisungen Seite 26

 respect the instructions and warnings displayed on the machine
labels.
The labels are accident prevention devices, and therefore must always
be perfectly legible. If these should be damaged and illegible, it is
mandatory to replace them by requesting replacements from the
Manufacturer.
 At the end of each working shift, before cleaning, maintenance or
transfer operations, disconnect electrical power.
WARNINGS FOR THE MAINTENANCE OPERATOR
Observe the instructions indicated in this manual.
 Always use individual safety devices and other protection means.
 Before starting any maintenance operations, make sure that the
oven, it was used, is cooled down .
 If any of the safety devices is worn or faulty, the oven is also
considered faulty and not to be used.
 Disconnect electrical power before intervening on electrical or
electronic parts and connectors.
2 INSTALLATION
Installation must be executed by qualified personnel in compliance with
local, national and European regulations.
EQUIPMENT HOOK-UP
The oven is not provided with power supply cable. When connecting the
appliance electrically, an automatic RCD must be interposed with an
opening distance between contacts of at least 3 mm.
appliance electrically it is essential to proceed in the following way:

raise the cover of the terminal block;
- 26 -
To connect the