Technical Data; Noise/Vibration Information - Bosch Uneo Originalbetriebsanleitung

14 | English
(5) Right rotational direction indicator
(6) Battery charge indicator
(7) Left rotational direction indicator
(8) Rotational direction switch
(9) On/off switch
A)
(10) Battery
(11) "PowerLight"
A)
(12) Universal bit holder
A)
(13) Screwdriver bit
(14) Screwdriver bit with ball catch
(15) Drill bit with hexagonal shank
(16) Drill bit with SDS-Quick tool holder
(17) Handle (insulated gripping surface)
(18) Battery bay
(19) Battery release button
A)
(20) Keyless chuck
(21) Front sleeve of the keyless chuck
(22) Rear sleeve of the keyless chuck
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless rotary hammer
Article number
Rated voltage
Rated speed
Rated speed, 1st gear
Max. torque, 1st gear
Max. torque, 2nd gear
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Tool holder
Max. drilling diameter
– Concrete (with twist
drill bit)
– Steel
– Steel (with straight
shank tool)
– Wood
– Masonry
Max. screw diameter
Weight according to EPTA-
Procedure 01:2014
– Recommended ambient
temperature during
charging
1 609 92A 4WJ | (04.12.2019)
Cordless rotary hammer
– Permitted ambient tem-
Recommended batteries
Recommended chargers
A) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
A)
product.
A)

Noise/Vibration Information

A)
Noise emission values determined according to
EN 60745-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power level
94 dB(A). Uncertainty K = 3 dB.
A)
Wear hearing protection!
A)
Vibration total values a
determined according to EN 60745-2-6, EN 60745-2-1:
Hammer drilling into concrete: a
Drilling into metal: a
Screwdriving: a
The vibration level and noise emission value given in these
Uneo
instructions have been measured in accordance with a
3 603 J84 0..
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
V= 12
estimation of vibration and noise emissions.
-1
min 0–900
The stated vibration level and noise emission value repres-
-1
min 0–280
ent the main applications of the power tool. However, if the
Nm 14
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
Nm 30
and noise emission value may differ. This may significantly
J 0.5
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
SDS Quick
times when the tool is switched off or when it is running but
Hexagonal
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
mm 10
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
mm 8
power tool and application tools, keeping their hands warm,
mm 10
and organising workflows correctly.
mm 10
Assembly
mm 10
u
mm 6
kg 1.3
°C 0 to +35
perature during opera-
A)
tion and during storage
(triax vector sum) and uncertainty K
h
= 20 m/s
h
2
= 4.0 m/s , K = 1.5 m/s
h
2
< 2.5 m/s , K = 1.5 m/s
h
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Uneo
°C –20 to +50
PBA 12V ...
AL 11..CV
GAL 1110 CV
GAL 1210 CV
GAL 12V-20
2 2
, K = 1.5 m/s ,
2
,
2
,
Bosch Power Tools