System Settings; Accessing The System Settings; Equalizer - Sonoro MAESTRO SO-1000 Bedienungsanleitung

20. SYSTEM SETTINGS

20.1 ACCESSING THE SYSTEM SETTINGS

• Press SETUP in any playback mode and then select [System Settings]
• Refer to the chapters below for details of each setting option.
The current settings (if applicable) are marked with an asterisk (*).
• See chapter "Using the menus" for browsing and making selections in the system
settings.

20.2 EQUALIZER

Select one of the sound equalizer options to adjust the sound according to your taste.
• [Loudness]
Loudness on, it adapts the treble and bass levels to suit the current volume, so that
delicate sounds can still be heard clearly when you listen to your music quietly.
• [Bass]
Adjust the bass level to tailor the sound of the audio playback.
• [Treble]
Adjust the treble level to tailor the sound of the audio playback.
• [Speakers]
Select the connected speakers size to match with MAESTRO.
• [Max. Power]
Suitable for large speakers with high power capability (full frequency response;
no limiter)
• [Medium Power]
Suitable for speakers with medium power capability (full frequency response; limited
to 100W@4Ohm or 50W@8Ohm)
• [2.1 System]
Suitable for 2.1 sound systems (the amplifiers of MAESTRO are operated with Linkwitz
2nd order high pass filter; no power limiter).
• [Crossover frequency]
Select the desired crossover frequency (80Hz are default). See also chapter 3.5.
• [Room correction EQ]
With this function, the room correction can be switched on or off.
For more details, see Chapter 22.
124 © sonoro audio GmbH 2019