LD Systems ICOA SERIES Bedienungsanleitung Seite 8

BLUETOOTH® (only LDICOA12ABT and LDICOA15ABT models)
The LDICOA12ABT and LDICOA15ABT models are Bluetooth-enabled to allow for audio files on another Bluetooth device (e.g. smartphone, tablet) to
be played back on speakers (maximum distance between both devices is approx. 10 meters; stereo signals are summed to mono internally.). To
enable Bluetooth, press the rotary-push encoder to access the main menu and then turn the encoder to select the menu item BLUETOOTH
(dark background). Press the encoder again to access the submenu and then turn the encoder to select ON (return to main menu with []).
Confirm the selection by pressing the encoder. Select the submenu item  HOME and then press the encoder to confirm the selection.
A flashing Bluetooth icon will now appear in the main display. Switch on Bluetooth on your smartphone or tablet and look for available
devices on the user interface. Select "LD ICOA® 12" or "LD ICOA® 15" to pair and connect your Bluetooth device with the speaker's Bluetooth
unit. The audio playback can start as soon as the process is completed. The Bluetooth symbol now permanently appears on the display.
If the Bluetooth connection is lost (e.g. out of range), the Bluetooth icon will start to flash again. The volume setting is carried out on the
player, and the master volume is adjusted using the encoder. If a Bluetooth connection to the speaker is not required to emit sound, disable
Bluetooth in the Bluetooth submenu (BLUETOOTH OFF).
SYSTEM SETTINGS (SETTINGS)
Press the rotary-push encoder to access the main menu and then turn the encoder to select the menu item SETTINGS (dark background).
Press the encoder again to access the submenu and then turn the encoder to select the desired submenu item. Confirm the selection by
pressing the encoder. Turn the encoder to change a value and then confirm the change in value by pressing the encoder. Refer to the table
below for the submenu items and the relevant information. In the submenu, select MAIN MENU and press the encoder to return to the
main menu. In the main menu, select HOME and then press the encoder to confirm this selection and return to the main menu. The main
menu will automatically be displayed after approx. 8 seconds of inactivity.
SETTINGS (Change value or status = turn encoder, confirm or request information = press encoder)
MAIN MENU
Return to main menu
LCD DIM
Automatic display dimming
BRIGHTNESS
Setting the display brightness (0–100%)
CONTRAST
Setting the display contrast (0–100%)
INFO
Display of model number and software version
FACTORY DEFAULT
Reset to factory default
(AUDIO, BLUETOOTH + SETTINGS)
8
ON Display is dimmed after approx. 8 seconds of inactivity
OFF Automatic display dimming switched off
CANCEL Cancel reset
RESET  SURE? YES
CANCEL
Execute reset
Cancel reset