Herunterladen Inhalt Inhalt Diese Seite drucken

Optional Accessories; Technical Specifications - LD Systems ICOA SERIES Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Take care when opening the device and rotating the high-frequency horn, in order to avoid damage to the speaker and injury to persons. Follow
each step of the instructions exactly. The manufacturer shall not be liable for any damage to devices or injury to persons resulting from improper
handling.
1. Fully disconnect the speaker from the mains (pull out the mains plug) and wait for approx. 3 minutes before starting work!
2. Disconnect all cables from the speaker.
3. Place the speaker in its slanted monitoring position, remove the front grille from the housing (5 x 2.5-mm internal hex screws on left and right of
the housing).
4. Loosen the 4 screws that secure the high-frequency horn (see figure A).
5. Carefully lift the horn and rotate it through 90°, taking care not to damage the tweeter driver cable.
6. Feed the tweeter driver cable into the retainer nut next to the securing lug and replace the horn in the retainers. Ensure that the cable is not
pinched.
7. Carefully secure the horn with the screws and re-install the front grille on the housing.

OPTIONAL ACCESSORIES

LDICOA12UB - Universal bracket for ICOA® 12
LDICOA15UB - Universal bracket for ICOA® 15
LDICOA12PC - Padded protective cover for ICOA® 12
LDICOA15PC - Padded protective cover for ICOA® 15
LDICOA12PC2 - Protective cover for ICOA® 12
LDICOA15PC2 - Protective cover for ICOA® 15

TECHNICAL SPECIFICATIONS

Article number:
Product type:
Type:
Bluetooth audio receiver:
Large woofer:
Large woofer:
Woofer magnet:
Woofer brand:
Tweeter:
Large HF driver:
Large HF driver:
HF driver magnet:
HF driver brand:
HF driver voice coil:
HF driver voice coil:
Amplifier:
Dispersion (H x V):
Power (RMS):
Power (Peak):
Frequency response:
Crossover frequency:
Max. SPL (Peak):
LDICOA12A
LDICOA12ABT
Coaxial PA speaker
-
Bluetooth 4.0
12"
304.8 mm
BEM-optimized CD horn
50 Hz–20 kHz
126 dB
LDICOA15A
Active
-
15"
381 mm
Ferrite
Custom-made
1"
25.4 mm
Ferrite
Custom-made
1"
25.4 mm
Class D
90° x 50°
300 W
1200 W
48 Hz–20 kHz
2 kHz
128 dB
LDICOA15ABT
Bluetooth 4.0
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ldicoa12abtLdicoa15abt

Inhaltsverzeichnis