Datalogic GRYPHON D series Kurzanleitung Seite 25

GRYPHON™ USB
POWER SAVE
scan rate 270 scans/s, standby disabled, sleep disabled
READING PARAMETERS
operating mode hand-held, trigger type = hardware, trigger signal = level, no
trigger timeout, Flash On = 1 sec, Flash Off = .6 sec, one read per cycle,
safety time .5 sec, beeper intensity high, tone 2, beeper type monotone,
beeper length short, good read spot duration medium
DECODING PARAMETERS
ink spread enabled, overflow control enabled, interdigit control enabled,
Puzzle Solver™ disabled, decoding safety = one read
CODE SELECTION
Enabled codes
•
Code PDF417 (only Gryphon™ USB D220)
•
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
•
Interleaved 2/5
check digit control and transmission, variable length code; 4-99
characters
•
Standard Code 39
no check digit control, variable length code; 1-99 characters
•
Code 128
variable length code; 1-99 characters
Disabled codes for D120 only:
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,
Plessey,
RSS Codes
Disabled codes for D220 only:
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes,
RSS Codes
ADVANCED FORMATTING PARAMETERS
concatenation disabled, no advanced formats defined
Telepen, Delta IBM, Code 11, Code 16K, Code 49,
19