Switching The Appliance On; Operating Tips; Setting The Temperature; Usable Capacity - Bosch KSV29VL30 Gebrauchsanleitung

Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
3
"super" display
Illuminates, if the super cooling is
in operation.
4
Temperature selection button
Press this button to set the
temperature.
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 2 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of
+4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.

Operating tips

While the refrigeration unit is running,
■
water droplets or a thin layer of ice
may form at the rear panel of
the refrigerator. This is nothing
unusual. It is not necessary to scrape
off the frost or wipe off the water
droplets. The rear panel defrosts
automatically. The condensation
collects in the condensation channel
and is carried to the refrigeration unit
where it evaporates.
If the air humidity is high,
■
condensation may form
in the refrigerator compartment,
especially on the glass shelves. If this
is the case, pack or wrap the food
and select a lower temperature
in the refrigerator compartment.
Setting
the temperature
Fig. "
The temperature can be set from +2 °C
to +8 °C.
Keep pressing temperature setting
button 4 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on the
temperature display 2.

Usable capacity

Information on the usable capacity can
be found inside your appliance on
the rating plate. Fig. -
en
25