Alarm; Setting The Alarm - Medion LIFE P64007 Bedienungsanleitung

9.5.3. Automatic synchronisation
The date and time can be set automatically, eliminating the need to set the time
and date manually. Data from the radio signal is used for this.
 Press the MENU button to open the menu.
 If a track is to be played back, use / to select MAIN MENU and press OK to
confirm.
 Use / to select TIME SETUP and press OK to confirm.
 Use / to select AUTO UPDATE and press OK to confirm.
 Use / to set:
– NO UPDATE: no automatic synchronisation
– FROM RADIO: automatic synchronisation enabled.
– Press OK to confirm.

9.6. Alarm

9.6.1. Setting the alarm

The device must be switched on for the alarm to be set. There are two alarm times
that can each be set independently of the other.
 Press the MENU button to open the menu.
 If a track is to be played back, use / to select MAIN MENU and press OK to
confirm.
 Use / to select ALARMS and press OK to confirm.
 Use / to select the desired ALARM 1 or ALARM 2 and press OK to confirm.
 Use / in succession to select the desired entries and press OK to confirm
each. Use / to make the respective settings in the menus.
The menu includes the following entries:
– ENABLE – Deactivate the alarm (OFF), and set a daily (DAILY) or one-off
alarm (ONCE). It is also possible to set regular alarms on weekdays (WEEK
DAYS) and weekends (WEEKENDS)
– TIME – Set the time of the alarm
– MODE – Select the operating mode in which you want to start the alarm
(DAB, FM, BUZZER = alarm tone)
– PRESET – Select a radio station from a station list that is to be used to start
the alarm or LAST PRESET for the last station set
– VOLUME – Select the alarm volume
– SAVE – Save settings
 Once all settings are completed, select SAVE and press OK to confirm.
The alarm has been set. When an alarm is switched on, a bell symbol with the corre-
sponding time set appears on the display.
DE
EN
FR
ES
IT
NL
67