Yamaha DM 1000 Bedienungsanleitung Seite 378

378
Anhang C: MIDI
2.12.3.18 Parameter change (Function call: pair, copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified channel.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call Pair
ADDRESS 00010001 11
function
0000ffff 0f
Source channel H
0sssssss sh
Source channel L
0sssssss sl
Destination channel H
DATA 0ddddddd dh
Destination channel L
0ddddddd dl
End of exclusive
EOX 11110111 F7
function
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1) 0:CH1 – 47:CH48, 128:BUS1 – 135:BUS8, 256:AUX1 – 263:AUX8,
512:STEREO
Effect is 0:Effect 1–3:Effect 4
• In the case of PAIR, you must specify channels for which pairing is pos-
sible.
• In the case of PAIR ON with COPY, you must specify Source Channel
as the copy source, and Destination Channel as the copy destination.
2.12.3.19 Parameter change (Function call Event: Effect )
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the corresponding effect's function activates (depending
on the effect type).
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call Effect Event
ADDRESS 00010010 12
function
0000ffff 0f
00000000 00
Release:0, Press:1
0ppppppp pp
DATA 00000000 00
Effect number (0:Effect1 - 3:Effect4)
0eeeeeee ee
End of exclusive
EOX 11110111 F7
function
Freeze Play button 0x00
Freeze Record button 0x01
Auto Pan 5.1 Trigger Button 0x02
Auto Pan 5.1 Reset Button 0x03
• This does not activate when the effect type is different.
2.12.3.20 Parameter change
When scene memory sort is executed on the DM1000, the memory sort table
will be transmitted to Studio Manager.
Studio Manager will sort the memories according to this data.
If Studio Manager performs a scene memory sort, it will transmit this data to
the DM1000.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM1000
MODEL ID 00001100 0C
Library sort table
ADDRESS 00010011 13
Library type
0000ffff 0f
Data
DATA 0ddddddd ds
: :
DM1000 Version 2—Bedienungsanleitung
channel
0x00 *1)
0x01 *1)
0x02 *1)
channel
0:Effect1-3:Effect4
0:Effect1-3:Effect4
0:Effect1-3:Effect4
0:Effect1-3:Effect4
(Sort Table)
Data
0ddddddd de
End of exclusive
EOX 11110111 F7
8-7 conversion is performed on the data area in the same way as for bulk.
2.12.3.21 Parameter request
When the DM1000 receives this data, it will transmit Sort Table Data.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM1000
MODEL ID 00001100 0C
Library sort table
ADDRESS 00010011 13
Library type
0000ffff 0f
End of exclusive
EOX 11110111 F7
2.12.3.22 Parameter change
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the same processing that is executed when the key speci-
fied by Address is pressed (released).
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM1000
MODEL ID 00001100 0C
Key remote
ADDRESS 00100000 20
Key address H
0kkkkkkk kk
Key address M
0kkkkkkk kk
Key address L
0kkkkkkk kk
Release:0, Press:1
DATA 0ppppppp pp
End of exclusive
EOX 11110111 F7
2.12.3.23 Parameter change
When transmission is enabled by receiving a Request of Remote meter, the
specified meter information is transmitted every 50 msec for 10 seconds. When
you want to transmit meter information continuously, a Request must be trans-
mitted continuously within every 10 seconds.
Reception
This is echoed if [Parameter change ECHO] is ON.
Transmission
When transmission has been enabled by a Request, the parameter specified by
Address will be transmitted on the [Rx CH] channel at 50 msec intervals for a
duration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if the
PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
DM1000
MODEL ID 00001100 0C
Remote meter
ADDRESS 00100001 21
ADDRESS UL
0mmmmmmm mm
ADDRESS LU
0mmmmmmm mm
ADDRESS LL
0mmmmmmm mm
Data1 H
DATA 0ddddddd dd
Data1 L
0ddddddd dd
: :
End of exclusive
EOX 11110111 F7
* The meter data can be either the unadjusted DECAY value of the DSP,
or the table-converted value. The interpretation of the data will de-
pend on the parameter.
(Sort Table)
(Key remote)
(Remote Meter)