Residual Risks; Operating Conditions - Zipper ZI-HS7H Originalbetriebsanleitung

2.5 PROPER USAGE
This machine is in conformity with the applicable ec-machine directive.
Logs may only be split in the direction of the grain.
Never try to split logs lying in horizontal position or
crosswise to the grain.
The safety, working and maintenance instructions
given by the manufacturer as well as the dimen-
sions indicated in the technical specifications must
be kept. The relevant rules for the prevention of
accidents and all other generally accepted safety
regulations must be observed.
This log splitter may only be used, maintained or
repaired by skilled persons who are familiar with it
and have been informed on the hazards related to
it. Any unauthorized modifications made to this log splitter will exclude the manufacturer's liability to
any damage resulting therefrom.
This log splitter may only be used in connection with original accessories and tools from its manufac-
turer. Any usage in excess of this will be considered improper. The manufacturer will not be liable to
any damage resulting therefrom, and the risk of it shall solely be borne by the user.
2.6

Residual Risks

Even proper usage can still involve the following residual risks:
 Injuries to your fingers and hands caused by the splitting tool.
 Injuries by workpieces and parts coming off as a result of improper holding and guiding.
 Injuries by contact with live parts when electric components are opened or defective.
 Hearing impairment after working for a long time without wearing ear protection.
 Residual hazards can be minimized if you follow the instructions given in the "Proper
Usage" and "Safety Instructions" chapters as well as in this User's Guide in general.

2.7 Operating Conditions

This log splitter is designed for outdoor temperatures between +5 °C and 40 °C. The air humidity
at the workplace should not exceed 50 % at 40 °C. This machine can be stored or handled at out-
door temperatures between -25 °C and 55 °C.
I M P O R T A N T
This machine has been designed and
built on condition that this User's
Guide be followed. Any modifications
to this machine or using it for any
purposes it has not been designed for
can lead to serious or fatal accidents
and will result in the annulment of
any right to claim under warranty.
21