Bluetooth - Samsung HW-H500 Bedienungsanleitung

FUNCTIONS

BLUETOOTH

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
+ To connect the SoundStand to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the ( ) button on the product's top panel
to display the icon LED.
• The LED will blink indicating that the Bluetooth
device is not connected yet.
2. Select the Bluetooth menu on the Bluetooth device
you want to connect. (Refer to the Bluetooth device's
user manual.)
3. Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of scanned devices.
4. Select "[Samsung] SoundStand" from the list.
• If the Bluetooth device is successfully connected
to the SoundStand, then the
blinking.
• If the Bluetooth device has failed to pair with the
SoundStand, delete the previous "[Samsung]
SoundStand" found by the Bluetooth device and
have it search for the SoundStand again.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the
SoundStand.
LED will stop
14
Connect
Bluetooth device
● If asked for PIN code when connecting a
Bluetooth device, enter <0000>.
● Only one Bluetooth device can be paired at a
time.
● The Bluetooth connection will be terminated
when you turn the SoundStand off.
● The SoundStand may not perform Bluetooth
search or connection correctly under the
following circumstances:
- If there is a strong electrical field around
the SoundStand.
- If several Bluetooth devices are
simultaneously paired with the
SoundStand.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
● The SoundStand supports SBC data
(44.1kHz, 48kHz).
● Connect only to a Bluetooth device that
supports the A2DP (AV) function.
● You cannot connect the SoundStand to a
Bluetooth device that supports only the HF
(Hands Free) function.