Samsung HW-H500 Bedienungsanleitung Seite 15

+ Bluetooth POWER On (Bluetooth
POWER)
When the Bluetooth Power On function is on and the
SoundStand is turned off, if a previously paired Bluetooth
device tries to pair with the SoundStand, the
SoundStand turns on automatically.
1. Press the Bluetooth POWER button on the remote
control.
2. The GREEN , and
SoundStand's display.
● Available only if the SoundStand is listed
among the Bluetooth device's paired devices.
(The Bluetooth device and the SoundStand
must have been previously paired at least
once.)
● The SoundStand will appear in the Bluetooth
device's searched devices list only when the
Bluetooth LED is blinking.
● In the TV SoundConnect mode, the
SoundStand cannot be paired to another
Bluetooth device.
+ To disconnect the Bluetooth
device from the SoundStand
You can disconnect the Bluetooth device from the
SoundStand. For instructions, see the Bluetooth device's
user manual.
● The SoundStand will be disconnected.
● When the SoundStand is disconnected from the
Bluetooth device, the
SoundStand's front display.
+ To disconnect the SoundStand
from the Bluetooth device
Press one of the other mode buttons on the remote
control or the ( ) button on the product's top panel
to switch from to another mode or turn off the
SoundStand.
● The connected Bluetooth device will wait a certain
amount of time for a response from the SoundStand
before terminating the connection. (Disconnection
time may differ, depending on the Bluetooth device)
LEDs appear on the
will blink on the
● In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the SoundStand and the Bluetooth device
exceeds 5m.
More About Bluetooth
Bluetooth is a technology that enables Bluetooth-
compliant devices to interconnect easily with each other
using a short wireless connection.
● A Bluetooth device may cause noise or malfunction,
depending on usage, when:
A part of your body is in contact with the
-
receiving/transmitting system of the Bluetooth
device or the SoundStand.
It is subject to electrical variation from
-
obstructions caused by a wall, corner, or office
partition.
It is exposed to electrical interference from same
-
frequency-band devices including medical
equipment, microwave ovens, and wireless
LANs.
● Pair the SoundStand with the Bluetooth device while
they are close together.
● The further the distance between the SoundStand
and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
● The Bluetooth connection only works when it is close
to the unit. The connection will be automatically cut
off if the Bluetooth device is out of range. Even within
range, the sound quality may be degraded by
obstacles such as walls or doors.
● This wireless device may cause electric interference
during its operation.
15
FUNCTIONS