Technical Specification - miniland thermo bath Bedienungsanleitung

C Count up set-up:
When the bee is in clock function press
MODE button and the display shows the
timer function. To reset the timer press
MIN and SEC buttons and the screen
displays: 00 00
M
button again and the count up starts.
To stop it press MODE button and after
10 seconds it will automatically come
back to clock function. If you don´t press
any button during the count up, the
counter will clock up 59
D Unit temperature (ºC / ºF) set up
When the bee is in clock function press MIN
and SEC buttons at the same time to change
the temperature unit from ºC to ºF.

6 TECHNICAL SPECIFICATION

· Measuring range: 10ºC to 50ºC
· High temperature alarm setting range 37ºC to 40ºC (99ºF to 104ºF).
Default: 39ºC
· Low temperature alarm: default 30ºC.
· Accuracy: +/-1 ºC
· Power: 1 x LR44 battery (included)
· Timer: 59 minutes, 59 seconds
· ºC / ºF selectable
7 BATTERY & PRODUCT DISPOSAL INFORMATION
· Remember to remove the battery when you dispose of this
thermometer and dispose of both responsibly.
· Do not mix products bearing the crossed out bin symbol with your
general household waste.
· For the correct collection and treatment of these products take
them to the collection points designated by your local authority.
Alternatively contact the retailer who sold you the product.
. Then press MODE
S
59 .
M S
Clock mode
Press (MODE)
Setting TIMER
Press (MIN) + (SEC)
M S
00 00
Press (MODE)
Count up starts
Clock mode
Press (MIN) + (SEC)
ºC or ºF setting done