Safety Instructions - miniland thermo bath Bedienungsanleitung

1 INTRODUCTION
Congratulations on the purchase of this friendly bee bath and room
thermometer, which includes clock with timer and stopwatch functions,
and high and low water temperature alarms.
Before using this device, please read all the instructions in this manual
carefully. Please keep this manual for future reference as it contains
important information.
2 CONTENTS
1 thermometer / 1 instruction manual and guarantee card

3 SAFETY INSTRUCTIONS

This device is safe for children to play with. It complies with EU toys
safety and electromagnetic standards.
Battery Warnings:
Use LR44 batteries only
1. Batteries should be inserted with correct polarity.
2. Consumed batteries should be removed from
the device.
3. Remove batteries for long periods of non-use.
4. You are advised that changes and modifications
not carried out on the equipment by the MINILAND
technical service are not covered by the product guarantee.
Battery: Use only the batteries recommended. Ensure batteries are inserted with
the correct palarity. Do not mix different battery types. Do not mix new and used
batteries together. Remove batteries when toy is not in use. Remove exhausted
batteries from toy and dispose of in accodande with the makers recommendation.
Do not attempt to recharge non-rechargeable batteries. Rechargeables batteries
should only be charged under adult supervision. Remove rechargeables batteries
from the toy beforecharging. The supply trminals are not to be short circuited.
Remove battery compartment lid using a screw driver.
4 PRODUCT FEATURES
This is a bath and room thermometer with a high and low water temperature
alarm and a Clock with timer and stopwatch functions. The main function of
this bee is to measure the bath water temperature. When put into the bath
water, it automatically comes on and the screen displays the water
temperature. It floats and is waterproof. This bee alerts with a green light and
the symbol when the water temperature is lower than 30ºC and with a red
light and the
(default value, it can be fixed between 37ºC to 40ºC). Moreover, when you
put the bee into the water, a stopwatch starts up, displaying the time since
the thermometer has been put into the water.
Additionally the bee measures and displays the room temperature
(while it is out of water), and also shows the clock time. After 30 minutes,
it changes to sleep mode, displaying just the time clock.
symbol when the water temperature is higher than 39ºC
ENGLISH
+
LR44
CLOSE
+
OPEN
LR44