Gewiss GW 90 835 Handbuch Seite 23

PROGRAMMING WITH THE EASY CONFIGURATOR
Once the function wanted has been created, the actuator's functioning parameters can
now be set.
The available parameters, in relation to the function created, are listed in the tables given
below.
The value underlined is the default value.
Function: timer mode
Parameter: switch-on time
not active
1 second
2 seconds
3 seconds
5 seconds
10 seconds
15 seconds
20 seconds
30 seconds
45 seconds
1 minute
1 minutes 15 sec.
1 minutes 30 sec.
2 minutes
2 minutes 30 sec.
3 minutes
5 minutes
15 minutes
20 minutes
30 minutes
1 hour
2 hours
3 hours
5 hours
12 hours
24 hours
Configuration parameters (Easy)
no timing
relay activated for 1 second
relay activated for 2 seconds
relay activated for 3 seconds
relay activated for 5 seconds
relay activated for 10 seconds
relay activated for 15 seconds
relay activated for 20 seconds
relay activated for 30 seconds
relay activated for 45 seconds
relay activated for 1 minute
relay activated for 1 minute and 15 seconds
relay activated for 1 minute and 30 seconds
relay activated for 2 minutes
relay activated for 2 minute and 30 seconds
relay activated for 3 minutes
relay activated for 5 minutes
relay activated for 15 minutes
relay activated for 20 minutes
relay activated for 30 minutes
relay activated for 1 hour
relay activated for 2 hours
relay activated for 3 hours
relay activated for 5 hours
relay activated for 12 hours
relay activated for 24 hours
23
E
N
G
L
I
S
H