Product Safety Information; Product Specifications - Ingersoll-Rand M2 series Technische Produktdaten

Product Safety Information

Intended Use:
These Air Sanders are designed for both light and heavy sanding jobs such as roughing body
filler, removing rust, and smoothing welds.
For additional information refer to Product Safety Information Manual Form 04580387.
Manuals can be downloaded from ingersollrandproducts.com
Polymer Hazard
The motor vanes in this product contain PTFE (Polytetrafluoroethylene). Due to normal vane
wear, PTFE dust might be present inside the product. Inhalation of this dust and/or inhalation of
vapor released from the heating of PTFE dust may cause irritation to the respiratory system.
Do not use compressed air to clean the parts of the product

PTFE dust should never come in contact with heat or open flames

Vapors from heated PTFE dust, if inhaled, can cause fluoride polymer fever

Never smoke when servicing this product

Wash your hands thoroughly after servicing the product


Product Specifications

Free
Speed Controller Arbor Size
Model(s)
rpm
M2L025RS9 2500
M2L025RS10 2500
M2L040RS9 4000
M2L040RS10 4000
M2L055RS9 5500
M2L055RS10 5500
M2L075RS10 7500
M2A120RS10 12000
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
48420533_ed4
WARNING
20k M14 THD
20k 5/8"-11 THD
18k M14 THD
18k 5/8"-11 THD
25k M14 THD
25k 5/8"-11 THD
18k 5/8"-11 THD
20K 5/8"-11 THD
WARNING
Sound Level dB(A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
87.0 98.0
87.0 98.0
88.8 99.8
88.8 99.8
88.8 99.8
88.8 99.8
86.9 97.9
87.1 98.1
*K = Vibration measurement uncertainty
EN
Vibration (m/s²)
(ISO28927)
) Level *K
w
4.0 1.4
4.0 1.4
2.8 1.8
2.8 1.8
3.7 1.1
3.7 1.1
3.7 1.3
2.5 1.0
EN-1