Herunterladen Diese Seite drucken

Axor Starck 10920 series Montageanleitung Seite 4

Werbung

Bei der Montage des Produktes durch
D
qualifiziertes Fachpersonal ist darauf zu achten, dass die
Befestigungsfläche im gesamten Bereich der Befestigung
plan ist (keine vorstehenden Fugen oder Fliesenversatz),
der Wandaufbau für eine Montage des Produktes
geeignet ist und insbesondere keine Schwachstellen
aufweist. Das mitgelieferte Befestigungsmaterial ist
geeignet für:
Beton
Naturstein mit dichtem Gefüge
Vollziegel
Kalksand-Vollstein
Bims-Vollstein
Porenbeton (Gasbeton)
Porenziegel
Hochlochziegel
Kalksand-Lochstein
Hohlblockstein aus Leichtbeton
Gipswände
Gipskarton, -faserplatten
Spanplatten
Bei anderen Wandaufbauten muss geeignetes
Befestigungsmaterial verwendet werden!
Lors du Montage du produit par un person-
F
nel qualifié, il faut que la surface de fixation soit
parfaitement plane (pas de joint ou de reste de
carrelage), que la construction du mur soit ap-
proprié à l' installation du produit et surtout ne
présente aucun point faible. Le matériel de fixa-
tion fourni convient à :
Béton
Pierre naturelle à structure dense
Brique pleine
Agglo plein
Agglo cellulaire
Béton cellulaire
Brique cellulaire
Brique avec alvéole verticale
Agglo à alvéole
Agglo de béton léger
Mur de plâtre
Placoplâtre, palco renforcé
Plaque d' aggloméré
Utiliser le matériel de fixation correspondant
avec d' autres produits de maçonnerie!

Where the contractor mounts the product,
GB
he should ensure that the entire area of the wall
to which the mounting plate is to be fitted, is flat
(no projecting joints or tiles sticking out), that
the structure of the wall is suitable for the instal-
lation of the product and has no weak points.
The delivered mountig kit is suitable for:
Concrete
Natural stone with dense structure
Solid brick
Sand-lime solid brick
Solid pumice bricks
Aircrete
Porous bricks
Vertically perforated brick
Sand-lime perforated block
Hollow block made from lightweight concrete
Solid panel made from gypsum
Standard gypsum wallboard / plaster fiber board
Chipboard
Suitable fixing material must be used at other
wall constructions!
Quando il personale tecnico specializzato es-
I
egue il montaggio del prodotto bisogna assicurarsi
che la superficie di fissaggio sia piana in tutta l'area di
fissaggio (senza giunti sporgenti o spostamento delle
piastrelle), che la struttura della parete sia adatta per il
montaggio del prodotto e soprattutto che non ci siano
dei punti deboli. Il materiale di fissaggio è adatto per:
calcestruzzo
pietra naturale con struttura compatta
mattone pieno
arenaria calcarea - mattone pieno
pietra pomice - mattone pieno
calcestruzzo cellulare (calcestruzzo poroso)
mattone poroso
mattone con perforazioni verticali
arenaria calcarea - mattone forato
blocco cavo di calcestruzzo leggero
pareti in gesso
cartongesso, pannelli in fibra di gesso
pannelli di truciolato
In caso di strutture della parete diverse bisogna usare
del materiale di fissaggio adatto!

Werbung

loading