Normal Operating Mode - Abus Rwm165 Bedienungs-, Installations- Und Wartungsanleitung

Installation and operation
Setting up
• If the smoke detector is mounted on the mounting base and the detector is
engaged, the detector is supplied with voltage and is activated.
• If the smoke detector is removed from the mounting base, the detector is no
longer ready for operation!
Reset to factory setting (radio connection is deactivated)
Press and hold the code button until the red LED flashes (approx. once per second).
Approx. 5 seconds later, the red LED will start flashing rapidly (approx. once in 0,5
seconds). Release the button and a short acoustic signal will sound. The smoke
alarm has successfully left the network and returned to the factory default settings.

Normal operating mode

The red LED light under the cover will flash approx. every 6 minutes in normal
operating mode signalling that the alarm is ready for use.
Option
– 40 –