Overview
The P-335 Plus is a broadband router and print server with a built-in four-port 10/100 Mbps switch. Use the
USB port to share a USB v1.1 compliant printer with the computers connected to the P-335 Plus, so you don't
need to assign a dedicated computer as a print server or have a standalone print server device. These
computers can also share Internet access via a broadband (cable/DSL) modem. The P-335 Plus can also
work as a print server without router functions allowing you to transparently install it in your network.
You should have an Internet account already set up and have been given most of the following information.
Table 1 Internet Account Information
Your device's WAN IP Address (if given): ______________
DNS Server IP Address (if given): Primary _____________, Secondary ______________
Connection Type:
Ethernet
Service Type: _______________________
User Name: ____________
PPTP
User Name: ____________
Your WAN IP Address (if given) ____________
Connection ID (if required): ____________
PPPoE
(PPPoE) Service Name: ____________
User Name: ____________
See your User's Guide for background information on all features.
The following lists what you need to do:
1 Hardware Connections
3 Internet Access Setup
ENGLISH
ENGLISH
Login Server IP Address: ______________
Password: ____________
Password: ____________
PPTP Server IP Address: ___________
or PPTP Domain Name: ___________
Password: ____________
2 Accessing the Web Configurator
4 Print Server Driver Setup
3