Avid Pro Tools Bedienungsanleitung Seite 34

3 The EQ III Plug-In window opens. You can use
the plug-in presets as a starting point for explor-
ing how different EQ settings affect the sound.
EQ III Plug-In window, Plug-In Preset selector
4
Start playback to hear the effect.
To apply compression to a track:
Window > Mix
1 Choose
2 In the top part of the track, click the next Track
Insert selector and choose
sor/Limiter
from the
Pro Tools inserts the Dynamics III Compres-
sor/Limiter plug-in on your track and opens its
plug-in window.
3 The Dyn III Plug-In window opens. You can
use the plug-in presets as a starting point for ex-
ploring how different EQ settings affect the
sound.
28 Introduction to Pro Tools Express
.
Dyn 3 Compres-
Dynamics
submenu.
Dyn III Plug-In window, Plug-In Preset selector
4 Start playback to hear the effect.
Using Reverberation
Reverberation (Reverb) provides a sense of
room acoustics. Reverb effects are essentially a
bunch of delays that are used to mimic the re-
flection of sound off of surfaces in different
rooms, halls, and other spaces. You can use re-
verb effects to create a sense of space for your
entire mix using sends from your source tracks
and processing using an Auxiliary Input track.
Reverb effects can make your mix sound like it is
in a big concert hall, an intimate room, or even a
narrow hallway.
One of the best ways to incorporate reverb in
your mix is in a "send-and-return" configura-
tion. In Pro Tools, using sends from tracks
makes it easy to route audio from multiple
tracks to and through the same reverb effect.
This way, your source tracks will all sound as if
they are in the same room.