Taurus Alpatec BOREAL 16CR Bedienungsanleitung Seite 13

- CAUTION: In order to prevent overheating do
not cover the appliance.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immedia-
tely disconnect the appliance from the mains to
prevent the possibility of an electric shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance near bathtubs,
showers or swimming pools.
- Do not use the appliance with damp hands or
feet, or when barefooted.
- Do not force the power cord. Never use the
power cord to lift up, carry or unplug the
appliance.
- Do not wrap the power cord around the applian-
ce.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged
or tangled cables increase the risk of electric
shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for
signs of damage, and if the cord is damaged,
the appliance must not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or
exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving
parts while it is operating.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Use the appliance handle, to catch it or move it.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Keep the appliance in good condition. Check
that the moving parts are not misaligned or jam-
med and make sure there are no broken parts
or anomalies that may prevent the appliance
from operating correctly.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
SERVICE:
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the fan is switched off from the
supply mains before start any installation or
assembly operation.
- The appliance should be used with its base
fitted.
ASSEMBLING THE BASE:
- Fit the base with the column (N), and secure it
with the screws provided (fig1). (Only models
with column)
- Position the pipe (N) small plastic cover (P), big
plastic cover (Q) and the the base (R) as per as
the Fig 1 ,
- To fix the base into the appliance, place the
appliance face down.
- Fix the base using the screw provided (fig1).
- Stand the appliance up again so as to check
that the base works properly.
ASSEMBLING THE GRILL AND THE PROPE-
LLER:
- Unscrew the plastic grill nut from the front of the
motor housing by rotating it anticlockwise.
- Position the back grill (F) against the front of the
motor housing (I) with the handle uppermost,
ensuing that the locating pegs on the motor
housing are engaged correctly in the holes of
the back grill.
- Tighten the grill nut (D) clockwise. Do not over
tighten it.
- Push the fan propeller (C) on to the motor shaft