Product Date Code; Materials Of Construction; Harsh Enclosure; Panel-Mount Enclosure - Mettler Toledo IND570xx Installationsanleitung

1.5.

Product Date Code

The product date code for the IND570xx terminal can be found on the serial data plate on the top of
both the panel-mount and harsh enclosures.
The serial number will begin with a letter and a number (for example B612000371). The letter
represents the first three digits of the year per the date code chart in Figure 1-1 (the letter "B" in our
example represents "201x") and the number is the unit's digit of the year (the number "6" in our
example). So, "B6" decodes to the year 2016.
1.6.

Materials of Construction

The following materials are used externally in the construction of the IND570xx terminal:
1.6.1.

Harsh Enclosure

•
•
•
•
•
•
•
•
1.6.2.
•
•
•
30205321 | 05 | 03/2019
Date Code
A
B
C
D
E
Enclosure - type 304L stainless steel
Enclosure gasket – silicon rubber
Keypad overlay - 0.2mm polyester (PET) with hardcoating
Cable glands - nickel plated brass
Hole plugs – nickel plated brass
Conduit hubs (Div 2 approval only) – zinc plated aluminum
Cable gland plugs - polycarbonate
Power cord (ATEX and IECEx only) - PVC jacket

Panel-mount Enclosure

Front panel - type 304L stainless steel
Front panel gasket - blend of PVC and neoprene rubber
Keypad overlay - 0.2mm polyester (PET) with hardcoating
METTLER TOLEDO IND570xx Division 2 and Zone 22 Installation Manual
Year Date Code
200x F
201x G
202x H
203x J
204x K
Figure 1-1: Date Code Format
Year
205x
206x
207x
208x
209x
1-5