Plumbing Connections - Miele professional PG 8057 TD Kurzgebrauchsanweisung

Water connections
The display will then change to the screen
for setting the water connections.
This setting can be switched off if the com-
mercial dishwasher cannot be connected to
all available water connections.
If individual water connections are
switched off, they can only be reactivated
by the Miele Customer Service Depart-
ment.
If a DI water connection is not available
and you wish to use the Beer glasses pro-
gramme (depending on the model), the
controls on the dishwasher have to be re-
programmed by the Miele Customer Ser-
vice Department to enable the final rinse
to be carried out with cold water.

Plumbing connections

Accept
Cold water
9
Use the  and  arrow buttons to select

the water connections which are not con-
nected and confirm your choice using the
OK button.
The tick  will be removed from the box 
and the water connection will then be
switched off.
Accept
Select to save your selection and

confirm using the OK button.
en - Before using for the first time
Commissioning completed
Commissioning is successfully completed
and the following message will appear in the
display.
Set up successful
Press the OK button.

The commercial dishwasher is now ready
for use.
The status display appears for 3 seconds.
Then the first direct-access pushbutton pro-
;
gramme will appear in the display.
,
M
PROFESSIONAL
PG 80XX

OK
31