Switching The Alarm Function On/Off; Stopping The Alarm; Auto-Stop Function - ADE WS 1907 Bedienungsanleitung

Switching the alarm function on/off

− Slide the ALARM1 (and/or ALARM2) switch on the
back of the device to ON.
Once the alarm symbol
(or both) and a beep sounds, the alarm function is
enabled.
− If you would like to disable the alarm function later on,
slide the ALARM1 (and/or ALARM2) switch to OFF.

Stopping the alarm

At the set time, you will be woken by an alarm signal,
which will become more intense as the waking time
increases.
Interrupting the alarm for 24 hours
− Press any button on the base station or press and hold
down SNOOZE/LIGHT for more than 2 seconds.

Auto-stop function

If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm will
be triggered again.
Repeat alarm (snooze function)
− Press the SNOOZE/LIGHT button once when the
alarm signal sounds.
A flashing symbol
WS 1907 digital rain gauge with DCF radio clock
or
(or ) and z will be displayed.
z
is displayed
75