Product Features - Instar IN-6014 HD Bedienungsanleitung

3. Product Features

Hardware
WDR Sensor
Wide-Angle Lens
MicroSD Card
PIR Sensor
Micro / Speaker
Audio output
Software
Privacy Areas
Alarm Areas
Alarm Triggers
Pre-Recording
Notifications
Alarm Server
Video Recording
Video Stream
Photo Series
Intercom
Connectivity
P2P
DDNS
Cloud
FTP Upload
WPS
WiFi
Go to http://install.instar.com
HD WDR OmniVision CMOS sensor / resolution 1280 x 720
Exchangeable 4.3mm lens with a ~90º diagonal field of view
Max. 32GB (8GB incl.) for alarm, manual and continuous recording
Integrated passive infrared motion detector
Integrated microphone and speaker for two-way audio
Separate audio output for 3,5mm head phone jack
Mask areas for privacy concerns
Define 4 areas for software motion detection and link with PIR
Supports motion, heat and noise detection
Alarm videos start 3 seconds before the trigger event
Alarm emails and push (text) notifications in case of an alarm trigger
Send alarm triggers to 3rd party devices such as home automations
15s alarm video / scheduled / manual continuous recording on SD
Supports stream protocols like RTSP, RTP, RTMP, ONVIF, MJPEG...
Interval snapshots for website integration or time lapse videos
Two-way audio with our InstarVision apps
Free point-2-point connectivity with InstarVision, works with IPv6
Free DDNS address to connect to your camera via the internet
Optional upload and managment of alarm videos in the INSTAR Cloud
Upload alarm images / videos to an FTP server
Use WiFi Protected Setup (WPS) to easily establish a WiFi connection
2.4Ghz WiFi with IEEE 802.11b/g/n and WPA/WPA2 encryption
4-EN