asalvo Convi-fix Bedienungsanleitung Seite 25

EN
INSTRUCTIONS
INSTALLATION IN ThE VEhICLE
installation WitH isofit & VeHicle Belt:
1
• Push release button forward as far
as possible.
• Push two locking arms firmly into
the insert guides until heard an
audible sound "click" on both sides,
and the green safety button must
now be visible on both sides.
Clic k
• Grasp the seat body to check the
seat if it is fastened tightly or shakes.
lf the seat shakes and the locking
arms are pulled out, please repeat
the above steps and install it again.